Typical Lead Time: 4-6 weeks
The all new Rock Bouncer X Chassis takes the place of our original Rock Bouncer Chassis that we have been building for years. We have redesigned and reworked the chassis to upgrade many aspects of the original.
Upgrades from the original Rock Bouncer chassis:
- Narrowed and lowered the Dash bar a few inches for increased visibility
- Design changes for mounting trailing arms and bypass shocks in the rear of the chassis
- Narrowed front frame rails to allow for bypass shock clearance
- Option of two different rear frame rail configurations depending on suspension choice
We have developed an entire line of parts and accessories to go with this chassis to make building at home easier. For all of the available options for this chassis, call us at 615-962-9135.
As with the original Rock Bouncer, this chassis was designed with the hardcore-trail rider and rock racer in mind. The Rock Bouncer X is made to satisfy the needs of someone looking to conquer the most extreme trails or obstacles. With the upgraded suspension capabilities we can conquer harder trails, drive faster, and ride better than we ever could before.This chassis, like all Wide Open Design chassis, was designed with our experience of rigorous testing and designing vehicles that can pushed to their limits while being a reliable off-road platform. Many available options for the Rock Bouncer’s components and configurations make this chassis platform the ultimate foundation for a 4×4 vehicle.
Typical Lead Time: 4 – 6 weeks
Hammer Down for Longer
Our Heavy Duty (HD) design places 1.75 x .188 wall tubing in the high impact areas where extra strength is needed.
A chassis built entirely out of .120 wall tubing will keep occupants safe in a roll over, but leaves the chassis vulnerable to getting dented and bent. The increased strengthening of a few key impact areas allows the chassis to have a better chance of remaining straight and is less likely to dent from sudden impacts. A heavy duty chassis only adds a minimum amount of weight and you’ll have a chassis that will hold up for years to come.
For specific tubing sizes used to build this chassis and their location, reference these images:
Sides are Protected with Replaceable .188 Tubing Rock Sliders
Adequate Rear End Room for Fuel Cell and Tool Box/Cooler
Easily fit a 15 gallon fuel cell and a fabricated tool box in the rear end. Have fun trail riding and bring along a few tools that you may need. Or use the tool box as a cooler for your beverages and food.
Install and Remove Components with Ease
|Removable Crossmembers allow for easily installing and removing of drive train components into the chassis. These tubes are connected using our Tube Flange sets.|
Correct 4 Link Installation Every Time
The chassis was designed for Proper 4-link Geometry and accepts the most popular axle configurations. Hesitant that it won’t fit yours? We can let you know for sure. Email us at email@example.com or give us a call at (615) 962-9135 to confirm.
Beautiful and Professional MIG Welded Fabrication
Our MIG welds are more than just strong, they are professional and good looking also. Our fabricators have years of experience welding onto our chassis and have developed the quality you’d expect from a professional facility. You get reliability and a great looking rig.
Full Support throughout your Build
When you purchase a Wide Open Design chassis, you are also purchasing full build support and guidance. We’ve built a large amount of buggies starting from our chassis and can answer pretty much any question you have in the process. We also have designed and manufactured components specific to our chassis to reduce guesswork and guarantee a great end product.
Build your Dream Rock Bouncer!
If there are modifications you may want done to the chassis, we may be able to do it! For a quote on chassis configuration, rolling chassis or turn-key vehicle please email firstname.lastname@example.org or give us a call at (615) 962-9135 with your ideal specifications.
- Wheel Base – 115″ to 122″
- Widest Point – 55″
- Weld Type – MIG
- Main steel structure construction – 1 3/4″x.120 wall DOM steel tubing
- The lower bars at the belly pan construction – 1 3/4″x.188 wall DOM steel tubing
- Rocker bars construction – 1 3/4″ x .188 wall DOM steel tubing
Available Added Options: