Red Line V8 Cooling System Combo, FJ40/45
Needing to cool your cruiser? A full bolt in kit that has everything you need. RedLine hasdeveloped this kit for all of our in house V8 cooling conversion set ups with no overheating issues. All of these parts will be available to purchase separately if you choose.
We have 2 kit selections to choose from. Please select option 1 0r 2 during check out
1. This kit with the use of a Dakota Digital Cluster
2. This kit with the use of any aftermarket autometer type gauges
Features for Option 1
- Custom aluminum bolt in fan shroud. This will Bolt right to the factory radiator housing support
- 16″ Fan Pulls 3000 CFM and draws 40 amps with free flow and 45 amps under full load> Make sure you have compatible Alternator power. If you need a bigger alt, please take a look here>
- 4 row aluminum Radiator. Direct bolt in. Cools up to 500 hp
- PAC-2750 digital fan controller
- Mounting hardware. Stainless hex 8.8 bolts
- Fan mounting hardware, (6mm x 1.0 hex 8.8 bolts washers and lock washers, and 8mm hex stainless bolts, washers and lock washers)
- 70 amp fan relay
Features for option 2
- Custom aluminum bolt in fan shroud. This will Bolt right to the factory radiator housing support
- 16″ Fan Pulls 3000 CFM and draws 40 amps with free flow and 45 amps under full load> Make sure you have compatible Alternator power. If you need a bigger alt, please take a look here>
- 4 row aluminum Radiator. Direct bolt in. Cools up to 500 hp
- Fan relay and wiring harness kit for aftermarket gauges
- 185* Water temp sender
- Fan mounting hardware (6mm x 1.0 hex 8.8 bolts washers and lock washers, and 8mm hex stainless bolts, washers and lock washers)
Note: If you have an LS based engine, you will need to order our temp sender adapter(s) depending on what gauges you have< SEE HERE >
Reviews
There are no reviews yet.