Frenched hangers are designed to mount up into the frame. This prevents the hangers from becoming caught by rocks on the trail. To install frenched hangers, your frame will need to be notched out with a plasma cutter or torch. Hangers are installed flush with the frame and then welded in place. These hangers reduce effective spring lift by 1 inch so order the next size up springs if you’re using these mounts. These are much stronger then stock hangers.
- Unpainted finish
- 1/4 Inch Thick ASTM A36 steel
- 18mm Bolt Hole
- Sold in Pairs
CALIFORNIA WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov